|
**************************************************************************************************************
Bimini
Tops
3
sizes
Sale Priced
Small
- $275
...... will fit SeaBright 270
/ 290 / 320
Medium
- $275
...... will fit SeaBright 380
Large
- $275
...... will fit SeaBright 430
/ 500
- Anodized aluminum
frame
- High quality Acrylic
fabric
- Rear support pole
- bimini top stays up when not in use
- Zippered storage
boot - for when bimini not in use
- Includes 4 "glue-on"
pads and glue
There are lots of Bimini Tops
for inflatable boats on the market but most have the following
drawbacks.
- They use the oarlocks as
a fastening point which means that you need to sacrifice
the use of your oars
- They do not have rear support
poles or a zippered boot which means that you have no place
to put the bimini when it is not in use.
Our Bimini Tops do not have
either of these drawbacks.
Click
On Picture (Below) For Larger Image
Click
On Picture (Below) For Larger Image
Click
On Picture (Below) For Larger Image
**************************************************************************************************************
Boarding
Ladders
3 sizes
$299
Small
- For SeaBright 380P
- And other Inflatable Boats with approx 45
cm (18 inch) tube diameter
Medium
- For SeaBright 430P
-
And other Inflatable Boats with approx 50 cm (20 inch) tube
diameter
Large
- For SeaBright 500P
-
And other Inflatable Boats with approx 55 cm (22 inch) tube
diameter
- Stainless Steel
- Includes "glue-on"
pads and glue
**************************************************************************************************************
Boat
Covers
UV
Radiation is
The
Number One Enemy of Inflatable Boats
7.5
feet ........
Sold Out.......
SeaBright 230
8.9
feet .......
$285
............. SeaBright
270
9.5
feet ........
Sold Out ..........
SeaBright 290
10.5
feet ......
Sold
Out
.......
SeaBright 320
12.5
feet ....
.. Sold
Out ....
. SeaBright 380
13.8
feet ......
Sold
Out
..
. .. SeaBright 420
14.4
feet ......
Sold
Out
..
. .. SeaBright 430
16.3
feet .......
Sold
Out
.....
SeaBright 500
Since these boats represent a sizable investment it is important
to note that in order to guarantee many years of service from
your boat, you must protect it from the sun.
This is not a concern for those of you who inflate your boat
for week-end use or while on vacation, but for the rest of
us who like to leave our inflatable sitting on the end of
a dock, or tied to the back of a sailboat all summer it is
an important realization.
With this in mind, SeaBright Marine is has designed an effective
and affordable sun/rain cover for your SeaBright inflatable
boat.
These covers are custom designed to fit each of the models
that we sell. They include a center pole to create a "tent
effect" so that rain water will run off and will not
pool inside the boat. The cover will install over an outboard
engine and if an outboard engine is installed then the pole
is not necessary because the engine itself will create the
"tent effect". These covers will also effectively
protect the bottom of your boat if you prefer to leave your
boat upside down on your dock.
Our covers are manufactured for us by TaylorMade Products®
in the U.S. using state of the art HotShot® fabric. As
well as being water resistant and extremely tough, HotShot®
fabric will protect your boat against harmful UV radiation.
Features
Heavy Duty shock cord
sewn into the hem
Fully adjustable from both bow and stern
Adjustable pole(s) to create a "tent effect - this allows
rain to drain off.
Tie down loops for trailering
Neutral "Sand Brown" color
Cover Installed Over Outboard
Engine
Cover Installed With Pole
**************************************************************************************************************
Care
& Maintenance
UV
Protectant
303 AeroSpace®
- SPF 40 Sunscreen ... For Your Stuff
- UV Inhibitors: Protect Against UV Damage, Chalking and Fading
- Protects fabric from "color fade"
- Protects PVC fabric against damage caused by sunscreen
- Fast and Easy to Use: Spray On and Wipe Dry
- Protects Against Dirt, Grime, Diesel, Soot, Stains, Stains
Bird Droppings and More
More information at https://www.goldeagle.com/product/303-aerospace-protectant/
$21-
473 ml
$33 - 950
ml
-----------------------------------------------------------------------------------------------------------------------------------------
Bottom
Coat
Aquagard® Inflatable
Bottom Coating
- Water-Based, Allows for Deflation / Rolling without Cracking
Paint
- Repels Barnacles and Marine Growth
- Easy Soap and Water Clean-Up
- Size: Quart, Color: Black
- A Clean Boat Bottom Equals Better Performance
More information at https://www.jamestowndistributors.com/userportal/show_product.do?pid=63939#
$69 -
1 Quart
----------------------------------------------------------------------------------------------------------------------------------------
Leak
Sealer
PolyMarine® Inflatable
Boat Interior Sealer
- A flexible waterbased acrylic latex sealant used internally
for sealing porosity and minor leaks in Hypalon and PVC inflatables
- Sealflex is introduced into the inflatable through the valve,
which is then inflated and tumbled to circulate the sealant
which adheres and cures to form an impermeable membrane
- Adheres to the interior fabric of the tube, sealing slow
leaks
- Hard to find leaks are treated and cured from the inside
More information click on this link https://www.polymarineshop.com/product/sealflex-500ml/
$79-
1 Liter
**************************************************************************************************************
Seats
And Consoles
FCT725
Seat / Console -- $999
Length
(front to back -- 39 in
Width ............... -- 30 in
Total Height ........ -- 32 in
Seat Height ......... -- 20 in
Color
...............
-- Grey
Material.............
-- Aluminum
HFC
Console -- $599
2 Available
Length
(front to back -- 54 in
Width ............... -- 16 in
Height .............. -- 35 in
Color
...............
-- Grey or White
Material.............
-- Fiberglass
**************************************************************************************************************
Electric
Pumps
Bravo
BTP12A - $149
12
Volt (car current)
Adjustable
pressure settings - 0
to 14 psi
Auto Shut Off when desired pressure
reached
2
Stage pump
1st stage to fill boat chamber quickly
2nd stage to bring to proper pressure
Both
inflation and deflation modes
Can
clip onto car battery
Or
Can plug into cigarette lighter
Includes
carrying case
Bravo
OV66 - $89
120
Volt (house current)
Pumps
to approximately 1.5 psi
This
pump will inflate your boat to about 90%
You will need to finish with your manual pump
o r with a 12V pump
Both
inflation and deflation modes
Plugs
into standard Wall Outlet
**************************************************************************************************************
Launching
Wheels
SeaMax®
- EZ L0ad
Fully pneumatic tires
12 inch Wheels
Weight Capacity: 500 lbs
2 Height Positions
Can be flipped up and locked when not in use, or removed
SALE PRICE - $199
SeaMax®
- Deluxe
Fully pneumatic tires
14 inch Wheels
Weight Capacity: 500 lbs
4 Height Positions
4 Angle Positions
Can be flipped up and locked when not in use, or removed
SALE PRICE - $279
**************************************************************************************************************
Seat
Covers (with
Under Seat Storage)
- Soft Cushion on top
- Zippered "Under Seat"
Storage
SALE
PRICE
$30-
ALL SIZES !!
**************************************************************************************************************
T-Top
(For RIBs)
$1,999
-
Attaches directly to the floor
- Adjustable width
- Fits Consoles
up to 47 inch wide
- 2 inch heavy duty White Powder Coated 6063 alloy frame
- Large grab handles
- Folds down for storage
- Marine grade Acrylic top (Black)
-
83 inches high
- 82 inches long x 61 inches wide Cover
- 28 inches front to rear feet center to center
**
Includes Top-Box and all hardware
........ see pics of Top-Box
Below
**
Lights, Antennas, Rods, and Rod Holders not included
Top
Box
-
Attaches directly to T-Top
- Includes hardware and lock
**************************************************************************************************************
Other
Hardware
-----------------------------------------------------------------------------------------------------------------------------------------
Beckson®
- Manual Bilge Pump
- 7 strokes per gallon
- Self-priming and self-lubricating
- Easy to clean
- 24 inch flexible "exhaust" hose
- Every inflatable boat should have one
- Quickly and easily pumps out rain water
$49
-----------------------------------------------------------------------------------------------------------------------------------------
Hydrofoil
Fin
Stingray Classic -
$99
- Recommended
for outboards over 40 HP
- Fits most outboard engines
- Hardware included
- Easier planing and reduced minimum planing speeds
- Improves cavitation
- Improves fuel consumption
**************************************************************************************************************
|
